1. Brief introduction:

   Alloy 800H and alloy 800HT are Ni-Fe-Cr alloys that have the same basic composition as alloy 800 but with significantely higher creep-rupture strength,normally used above  approximately 1100℉（593℃）where resistance to creep and stress rupture is required.

   Alloy 800H is used in chemical and petrochemical processing, power plants for super-heater and reheater tubing, industrial furnaces and heat-treating equipment.

   
   

2. Main specifications:

   Chinese	UNS	Werkstoff Nr.
   NS112	N08810	1.4958
   800HT	N08811	1.4959

   
   

3. Chemical composition under ASTM B408-2016 standard:

   Grade	chemical composition,%
   	Ni	Cr	Fe	Mn	C	Cu	Si	S	Al	Ti	Al+Ti
   alloy N08810	30.0-35.0	19.0-23.0	≥39.5	≤1.5	0.05-0.1	≤0.75	≤1.0	≤0.015	0.15-0.6	0.15-0.6	/
   alloy N08811	30.0-35.0	19.0-23.0	≥39.5	≤1.5	0.06-0.1	≤0.75	≤1.0	≤0.015	0.15-0.6	0.15-0.6	0.85-1.2

   
   

4. Fe element shall be determined arithmetically by difference.

   wire,rod,forging, bar,strip,sheet/plate,tube/pipe.

   
   

5. Main produce standards:

   Wire,Rod, Bar	Forging	Plate/Sheet/Strip	Seamless Tube/Pipe
   ASTM B408  ASME SB408	ASTM B564    ASME SB564	ASTM B409 ASME SB409  AMS5871	ASTM B163 ASME SB163 ASTM B407      ASME SB407

For more product information, please click the top product menu navigation, or view the relevant product information in the right column.